October 2, 2023


The layout of our house

Inexpensive DIY Batten Wall Using Lattice Strips


Tutorial: How to use lattice strips as an uncomplicated, cheap substitute to set up a Diy batten wall for adding classic character to basic walls.

Lattice strips are the MVP of this Do-it-yourself batten wall project!

I suggest they really are the unsung hero of a ton of minimal DIYs and crafts close to below. (Remember that shower curtain artwork we framed with lattice strips a when again?) This time it required a highlight in the breakfast nook.

A DIY batten wall behind brass vintage sconces above a green banquette bench

Considering the fact that we type of have an dependancy to intricate wall molding all over here, it is unquestionably no surprise at all that just after we completed setting up and painting our Fb Marketplace banquette find in the breakfast nook, Robert and I looked at each individual other and mentioned, “Something’s lacking.”

Those easy walls required character! And lattice could do the work inexpensively. Simply because molding is 1 of my favorite methods to make a property look magnificent.

A breakfast nook with olive green banquette, herringbone floors, white walls, and black bifold French door

What is Lattice?

Lattice is made of slender strips of wooden most normally applied in a criss-cross composition for trellises to assist climbing vegetation in gardens or to serve as porch skirting.

But it is perfect for uncomplicated wall molding tasks much too. (Form of like Sharpie shiplap but way more legit.)

The selling price of molding has skyrocketed currently (alongside with each individual other household improvement offer), so we figured out a way to incorporate dear wanting batten wall molding for the portion of the selling price utilizing helpful dandy lattice strips at $1.28 for every linear foot.

If you have under no circumstances put in any sort of molding just before, it’s the fantastic newbie model to consider given that it requires no miter cuts and lattice can sit flush proper on leading of your existing baseboards given that they’re thinner than normal 1×2 boards.

a stack of lattice strips

How to Make a Batten Wall Using Lattice Strips

You could incorporate this vertical batten wall all close to the home, as wainscoting, or just as a board and batten accent wall. You could depart your walls basic devoid of any wall decor for a minimalist technique or layer it with artwork for even a lot more character.

It would be excellent for adding on to a plain kitchen island as well. Continue to keep in head while, if you have a textured wall, the procedure won’t be as uncomplicated, since you will require to include these MDF panels to your textured partitions utilizing Liquid Nails and brad nails initially.


Methods to Make a Batten Lattice Wall

measuring a wall to place lattice strips for a DIY batten wall

Step 1 – Evaluate and Make your mind up on a Layout

Evaluate your whole wall first, decide how much aside you want your batten (vertical lattice strips) to be, and mark their placement on the wall with a pencil.

Keep in mind that lattice strips are 1 1/2″ large, so issue that into your format plan. We set our battens to have an 8 1/2″ gap between.

Phase 2 – Cut Lattice Length

Evaluate the top of your wall from baseboard to crown and slash the first lattice strip to the required duration with a jigsaw. (Not all walls will be perfectly the similar top all the way throughout, so don’t cut all of your lattice dependent on that initial measurement.)

checking with a level to make sure lattice strips are perpendicular

Step 3 – Use a Degree to Look at Lattice Placement

“Dry fit” the 1st lattice strip and use a amount to make guaranteed it’s flawlessly straight.

Phase 4 – Nail Lattice

When you’re happy with the lattice strip placement, nail it to the wall with the brad nailer (or a hammer).

You can use building adhesive in this article as perfectly, if you decide on, but mainly because the lattice is so lightweight, it’s entirely optional. (The batten wall will also be less complicated to clear away without the need of adhesive later if 1 day you alter your intellect.)

installing lattice strips for wall molding by dry fitting

Phase 5 – Repeat

Repeat Techniques 2-4 until eventually you’ve positioned all lattice strips alongside the wall.

nailing lattice strips to a wall for DIY batten wall molding

Step 6 – Caulk Cracks and Wooden Fill Nail Holes

Caulk all of the edges of the lattice strips to fill all of the cracks, and fill all of the nail holes with wooden filler.

caulking and wood filling lattice strips

Phase 7 – Sand Wooden Filler

When the wood filler is absolutely dry, sand clean with fantastic grit sandpaper (we use an orbital sander to make the course of action go speedier). Brush absent any sanding dust immediately after.

batten wall after caulking, wood filling, and sanding smooth before painting

Step 8 – Paint

Give almost everything a fresh coat of paint and you are accomplished! (We painted the wall first with the very same coloration we prepared to use on the lattice strips so that we wouldn’t have to do the job close to all of the particulars later on.)

batten wall painted white with brass vintage style sconces and green banquette

The Finished Batten Wall

Really don’t you feel these two batten partitions include so substantially to this little breakfast nook corner? I like it so a lot!

We added these classic type sconces to provide much more light-weight into this windowless house. What do you think?!

They operate so properly with this linear chandelier that provides a contact of fashionable, and the brass pops against that batten wall we painted Benjamin Moore Chantilly Lace.

breakfast nook with green banquette bench, white batten wall made of lattice strips, and brass lighting

Wrapping Up Breakfast Nook Information

I even now prepare to paint the air vent and incorporate knobs to the banquette cupboard doorways.

(Now that it is dry, I have to confess, never enjoy the paint I had to use on the banquette thanks to source chain concerns creating my favourite cupboard paints to be offered out. But oh effectively. If that is our greatest obstacle, I’ll take it.)

I just bought the get in touch with this week that the recently reupholstered cushions are concluded! So it will all be coming alongside one another in below quickly.

These Diy herringbone LVP floors still appear absolutely amazing since we installed them a several weeks back! Subsequent on the record is making a desk, refinishing some secondhand dining chairs for the other facet, and introducing some classic artwork and decor finds.

It will be so charming as we wrap up the ultimate information.

olive green banquette bench in a breakfast nook with white batten, herringbone floors, and black door

Have you ever finished a Do-it-yourself batten wall ahead of? Or observed a new use for lattice strips? They’re the best for so a lot of issues!

Extra Job Thoughts Employing Lattice Strips

If you want much more wall molding thoughts, below are a couple of more also.

Far more Do it yourself Wall Molding Concepts



Supply website link